Red Hat ENTERPRISE LINUX WS 2.1 - Guía de instalación Pagina 83

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 272
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 82
Configuration of TOPSPIN 83
DONE
INDEX
INDEX
6. The BSMS Service Web - ELCB Firmware Download page appears.
Click on the button Browse to select the firmware version which is mentioned in
the line Select the file.... In a default installation the file is stored in the directory:
C:\Bruker\TOPSPIN\conf\instr\servtool\bsmscnf\
7. Click on the button install firmware.
Note: Selecting Get File elcb_firmware_XXXXXX.gz from Bruker ftp server is
only necessary if a Bruker Service Engineer recommends to do this.
The ELCB firmware releases 06xxxx and up are distributed as *.gz files.
To be able to load this file format to the ELCB the firmware:
elcb_firmware_051116.hex
or newer has to be running on the ELCB. If an older firmware is running first
download the elcb_firmware_051116.hex distribution.
The *.gz file has to be loaded as is, do not unzip it!
6.3.2.1 ELCB board: Save user configuration
You can save the user specific configuration of the ELCB board in a Text file.
Vista de pagina 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 271 272

Comentarios a estos manuales

Sin comentarios