Red Hat NETWORK 3.6 - Manual de usuario descargar pdf (Pagina 29)

After finishing the installation, the installer restarts the host. The virtual desktop and server manager

daemon should be up and running.

Figure 15: Installation Complete

Step 3: Add iSER support by applying the iscsi.py.patch.

Note: Retrieve the iscsi.py.patch from Mellanox support, ready for RHEV 3.0.

For RHEV 3.1 and later skip this section.

Step 4: Copy iscsi.py.patch to /tmp, and run:

[root@host3]# cd /usr/share/vdsm/storage

[root@host3]# patch iscsi.py < /tmp/iscsi.py.patch

[root@host3]# service vdsmd restart

Step 5: Verify that the VDSM daemon is running:

[root@host3]# /etc/init.d/vdsmd status

VDS daemon server is running

Figure 16: Host is Up

4.4 Add Storage

Perform the following operations in order to add a storage domain using RHEV-M.

Step 1: Connect to the RHEV-M Portal.

Step 2: Click System à Default à Storage à New Domain.

Step 3: Enter a name for the domain.

Step 4: Enter an IP of the VSA host.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 50 51

Sin comentarios

Red Hat NETWORK 3.6 - Manual de usuario Pagina 29