Red Hat NETWORK 4.1.0 - CHANNEL MANAGEMENTT GUIDE Manual de servicio Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 104
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Brocade Network Advisor Installation and Migration Guide xi
53-1003746-01
IronWare hardware and software support
The following firmware platforms are supported by this release of Network Advisor 12.4.0:
BigIron 2.7.02e (sustaining mode) or later
FastIron 7.2.0 or later
NetIron 5.1.0 or later
ServerIron (JetCore) 11.0 (sustaining mode) or later
ServerIron ADX 12.2.0 or later
TurboIron 4.2.0 (sustaining mode) or later
For platform-specific firmware requirements, refer to Table 2.
Table 2 lists the hardware platforms supported by this release of Network Advisor 12.4.0, the
terminology used in the documentation, as well as any specific firmware requirements.
FC16-48 Blade 16 Gbps 48-port blade Fabric OS v7.0.0 or later
FC16-64 Blade 16 Gbps 64-port blade Fabric OS v7.3.0 or later
FCoE10-24 Blade
4
10 Gbps FCoE Port Router Blade Fabric OS v6.3.0 or later
FR4-18i
Blade 4 Gbps Router Extension blade Fabric OS v5.1.0 or later
FS8-18 Encryption Blade Encryption Blade Fabric OS v6.1.1_enc or later
FX8-24 Blade
1, 2
8 Gbps Router Extension Blade Fabric OS v6.4.0 or later
1. Professional can discover, but not manage, this device. Use the device’s Element Manager, which can be launched from the Connectivity
Map, to manage the device. This device cannot be used as a Seed switch.
2. Professional Plus Trial and Licensed version can discover, but not manage, this device. Use the device’s Element Manager, which can be
launched from the Connectivity Map, to manage the device. This device cannot be used as a Seed switch.
3. Only supported on the DCX 8510-4 and DCX 8510-8 chassis.
4. Only supported on the DCX, DCX-4S, and DCX 8510-8 chassis.
TABLE 1 Fabric OS-supported hardware (Continued)
Device name Terminology used in documentation Firmware level required
TABLE 2 IronWare-supported hardware
Device name Terminology used in documentation Firmware level required
BigIron family Ethernet Chassis BigIron 2.7.02e or 2.7.01b
BigIron RX-4 (BI-RX-4-AC) Ethernet Chassis, 4 interface slots BigIron 2.7.02e or 2.7.01b
BigIron RX-8 (BI-RX-8-AC) Ethernet Chassis, 8 interface slots BigIron 2.7.02e or 2.7.01b
BigIron RX-16 (BI-RX-16-AC-A) Ethernet Chassis, 16 interface slots BigIron 2.7.02e or 2.7.01b
Brocade 6910 Ethernet Access Switch Ethernet Access Switch release 2.0.2.7, loader version 1.0.1.3
FastIron family Ethernet switch See individual device.
FastIron CX 624S (FCX624S) Ethernet L2/L3 Edge switch, 24 1GbE
RJ45 ports
FastIron 06.0.00 and later
FastIron CX 648S (FCX648S) Ethernet L2/L3 Edge switch, 48 1GbE
RJ45 ports
FastIron 06.0.00 and later
FastIron CX 624S-HPOE (FCX624S-HPOE) Ethernet L2/L3 Edge switch, 24 1GbE
RJ45 ports, 24
POE+ ports
FastIron 06.0.00 and later
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 103 104

Comentarios a estos manuales

Sin comentarios