8 Click Finish to add the drive to the virtual machine.
9 Click OK to save your changes.
Configure Legacy Emulation Mode for a DVD or CD-ROM Drive
Use legacy emulation mode to work around direct communication problems between a guest operating
system and a DVD or CD-ROM drive.
In legacy emulation mode, you can read only from data discs in the DVD or CD-ROM drive. Legacy
emulation mode does not provide the other capabilities of normal mode. In normal mode, the guest
operating system communicates directly with the CD-ROM or DVD drive. This direct communication
enables you to read multisession CDs, perform digital audio extraction, view videos, and use CD and DVD
writers to burn discs.
If you run more than one virtual machine at a time, and if their CD-ROM drives are in legacy emulation
mode, you must start the virtual machines with their CD-ROM drives disconnected. By disconnecting the
CD-ROM drives in the virtual machines, you prevent multiple virtual machines from being connected to the
CD-ROM drive at the same time.
Procedure
1 Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2 On the Hardware tab, select the drive and click Advanced.
3 Select Legacy emulation and click OK.
On Windows hosts, this option is deselected by default. On Linux hosts that have IDE drives, the
default setting depends on whether the ide-scsi module is loaded in the kernel. The ide-scsi module
must be loaded, or you must use a physical SCSI drive, to connect directly to the DVD or CD-ROM
drive.
4 Click OK to save your changes.
Configuring a USB Controller
A virtual machine must have a USB controller to use USB devices and smart card readers. To use a smart
card reader, a virtual machine must have a USB controller regardless of whether the smart card reader is
actually a USB device.
Player provides a USB controller to support the following types of USB devices.
n
USB 1.1 UHCI (Universal Host Controller Interface) is supported for all virtual machine hardware
versions.
n
USB 2.0 EHCI (Enhanced Host Controller Interface) controllers are supported if the virtual machine
hardware is compatible with Workstation 6 and later virtual machines.
n
USB 3.0 xHCI (Extensible Host Controller Interface) support is available for Linux guests running
kernel version 2.6.35 or later and for Windows 8 guests. The virtual machine hardware must be
compatible with Workstation 8 or later virtual machines.
For USB 2.0 or 3.0 support, you must select USB 2.0 or 3.0 compatibility by configuring virtual machine
settings for the USB controller. USB 2.0 and 3.0 devices are high-speed devices that include the latest models
of USB flash drives, USB hard drives, iPods, and iPhone.
If you select USB 2.0 compatibility, when a USB 2.0 device connects to a USB port on the host system, the
device connects to the EHCI controller and operates in USB 2.0 mode. A USB 1.1 device connects to the
UHCI controller and operates in USB 1.1 mode. If you enable USB 3.0, the xHCI controller can support all
USB devices, including USB 1.1, 2.0, and 3.0 devices.
Chapter 6 Configuring and Managing Devices
VMware, Inc. 79
Comentarios a estos manuales