Red Hat LC2000r - NetServer - 128 MB RAM Manual de servicio Pagina 90

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 107
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 89
Chapter 6 Replacing Parts
84
5. Gain access to the HP NetServer by referring to Replacing the Bezel and Replacing the
Covers.
CAUTION Wear a wrist strap and use a static-dissipating work surface connected to the
chassis when handling components. Ensure the metal of the wrist strap contacts
your skin.
6. Disconnect the signal cable (ribbon cable) and the power cable from the rear of the flexible disk
drive.
7. Use the T-15 driver to remove the two screws holding the flexible disk drive to the front of the
chassis.
Flexible Disk Drive Removal
8. Side the flexible forward and out of the chassis.
Replacing the Flexible Disk Drive
Move the mounting brackets from the old flexible disk drive to the replacement flexible disk drive and reverse
the above procedure.
NOTE The flexible disk drive connectors are keyed. Ensure the cables are fully seated.
Vista de pagina 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 106 107

Comentarios a estos manuales

Sin comentarios