Red Hat NETWORK - USER 3.0 Guía de instalación descargar pdf (Pagina 18)

Chapter 2. Requirements

Note

Ensure that the NLS/charset setting is set to "UTF8"' when using an external database, not

'AL32UTF8' or other charsets. Using other charsets may lead to problems later.

The disk layout on the database machine is independent of the RHN Satellite and entirely up to the

customer.

2.4. Additional Requirements

The following additional requirements must be met before the RHN Satellite installation:

• Full Access

Client systems need full network access to the RHN Satellite solution's services and ports.

•

Firewall Rules

RHN strongly recommends firewalling the RHN Satellite solution from the Internet. However, various

TCP ports must be opened on the Satellite, depending on your implementation of RHN Satellite:

Table 2.4. Ports to open on the Satellite

Port Direction Reason

67 Inbound Open this port to configure the Satellite

system as a DHCP server for systems

requesting IP addresses.

69 Inbound Open this port to configure Satellite as a

PXE server and allow installation and re-

installation of PXE-boot enabled systems.

80 Outbound Satellite uses this port to reach RHN

80 Inbound WebUI and client requests come in via

either http or https

443 Inbound WebUI and client requests come in via

either http or https

443 Outbound RHN Satellite uses this port to reach RHN

(unless running in a disconnected mode

for Satellite)

4545 Inbound/Outbound RHN Satellite Monitoring makes

connections to rhnmd running on client

systems, if Monitoring is enabled and

probes are configured for registered

systems.

5222 Inbound If you plan to push actions to client

systems

5269 Inbound/Outbound If you push actions to or via an RHN

Proxy Server

RHN's list of hosts are as follows:rhn.redhat.com, xmlrpc.rhn.redhat.com, satellite.rhn.redhat.com, content-

xmlrpc.rhn.redhat.com, content-web.rhn.redhat.com, and content-satellite.rhn.redhat.com

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 85 86

Sin comentarios

Red Hat NETWORK - USER 3.0 Guía de instalación Pagina 18