Red Hat DEVICE-MAPPER MULTIPATH 5.2 Manual de usuario descargar pdf (Pagina 23)

Add the following lines at the end of the "devices" section.

(This example is for the ETERNUS DX410)

devices {

device {

vendor "FUJITSU"

product "ETERNUS_DX400"

prio alua

path_grouping_policy group_by_prio

path_selector "round-robin 0"

failback immediate

no_path_retry 10

path_checker tur

}

• Enter a space between "defaults" and "{".

• Enter a space between "devices" and "{".

• Enter a space between "device" and "{".

The "product" value varies depending on the ETERNUS DX that is to be connected.

Refer to the following table for the appropriate value.

ETERNUS DX to be used "product" value

DX60 S3/DX100 S3/DX200 S3,

DX200F,

DX60/DX60 S2, DX80/DX80 S2, DX90/DX90 S2

ETERNUS_DXL

DX500 S3/DX600 S3 ETERNUS_DXM

DX400/DX400 S2 series ETERNUS_DX400

DX8000/DX8000 S2 series ETERNUS_DX8000

If any internal disks or other devices are to be excluded from the multipath configuration, specify the

excluded devices in the "blacklist" section. Refer to the Novell web-site for details.

Chapter 5 For SUSE Linux Enterprise Server 10

5.1 For SUSE Linux Enterprise Server 10 SP3 or Later

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

(Fibre Channel/FCoE/iSCSI/SAS) for Linux

P3AM-3912-21ENZ0

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Sin comentarios

Red Hat DEVICE-MAPPER MULTIPATH 5.2 Manual de usuario Pagina 23