Red Hat DEVICE-MAPPER MULTIPATH 5.2 Manual de usuario descargar pdf (Pagina 29)

•

Multipath (the "5:0:0:X" side) is in error status (This example shows when two paths are used to connect to

the ETERNUS DX410)

# multipath -ll

mpathr (3600000e00d00000000000422001e0000) dm-20 FUJITSU,ETERNUS_DX400

[size=2.0G][features=1 queue_if_no_path][hwhandler=0]

\_ round-robin 0 [prio=100][active]

\_ 6:0:0:6 sdaf 65:240 [active][ready]

\_ 5:0:0:6 sdh 8:112 [failed][faulty]

The status for the failed path is

"[failed][faulty]".

For SLES10, the following message may appear in the path status after executing the "multipath -ll" com-

mand. However, there is no actual problem with multipath configuration and operation.

sdaf: Using deprecated prio_callout '/sbin/mpath_prio_alua %d' (controller setting)

Please fixup /etc/multipath.conf

sdh: Using deprecated prio_callout '/sbin/mpath_prio_alua %d' (controller setting)

Please fixup /etc/multipath.conf

Chapter 5 For SUSE Linux Enterprise Server 10

5.2 For SUSE Linux Enterprise Server 10 SP2 or Earlier

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

(Fibre Channel/FCoE/iSCSI/SAS) for Linux

P3AM-3912-21ENZ0

1 2 ... 24 25 26 27 28 29 30 31

Sin comentarios

Red Hat DEVICE-MAPPER MULTIPATH 5.2 Manual de usuario Pagina 29