Red Hat SATELLITE 5.1.0 RELEASE NOTES Manual de instalación descargar pdf (Pagina 56)

38 The Virtualization Cookbook for Red Hat Enterprise Linux 5.2

9. You will lose the current session on the Integrated 3270 Console, but the system should

come back in about 2 to 4 minutes.

10.After it comes back, the last message should be Press enter or clear key to continue.

Press Enter and you should see a z/VM logon window.

At this point, you should now have a vanilla z/VM system installed.

4.2 Configuring TCP/IP

We recommend that you initially configure TCP/IP using the IPWIZARD command, which is

generally used just once. After IPWIZARD creates the initial configuration files, they are

typically maintained manually.

From the z/VM logon window, logon to MAINT. The default password for all z/VM user IDs is

the same as the user ID. So enter a password of maint, which will not be echoed on the

window.

USERID ==> maint

PASSWORD ==>

After entering the user ID and password, press Enter when the status area in the lower right

shows VM READ.

4.2.1 Use the IPWIZARD tool

The IPWIZARD command is on the MAINT 193 disk. You will need to access it as file mode G

using the ACCESS command so that you will pick up IPWIZARD from that minidisk.

1. Access the MAINT 193 disk:

==> acc 193 g

2. Invoke IPWIZARD.

==> ipwizard

Figure 4-10 IPWIZARD window 1

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 267 268

Sin comentarios

Red Hat SATELLITE 5.1.0 RELEASE NOTES Manual de instalación Pagina 56