Red Hat ENTERPRISE LINUX 4.5.0 - Guía de usuario descargar pdf (Pagina 39)

3.1.1.

Address Setting of Manager (TCP_IP In-Band)

When [Address...] is pressed when "Manager (TCP_IP In-Band)" has been selected as "Method" on [ID

Setting] screen, [Manager (TCP_IP In-Band) Setting] screen opens.

If own hostname is unestablished in /etc/hosts, NEC ESMPRO Agent acquires IP address of the origin of

TRAP transmission using socket communication of UDP.

When host name is displayed unknown server AlertViewer of NEC ESMPRO Manager, set host name and IP

address of the server which installed NEC ESMPRO Agent in /etc/hosts file.

[example] IP Address of server: 192.168.1.123, Hostname: server1

192.168.1.123 server1

About the mention contents details to /etc/hosts file, refer to "The report which it received with AlertViewer

of NEC ESMPRO Manager becomes the unknown server." item of "6. Common Questions"

IP Address (or Host Name)

Set IP address (or Host Name) of NEC ESMPRO Manager. You cannot omit it.

Port Number

The port number used for the communication between sockets can be set. For this number, the value

must be the same for NEC ESMPRO Agent and NEC ESMPRO Manager. Default value is 31134 for both

of NEC ESMPRO Agent and NEC ESMPRO Manager. Do not change the value as long as default value

works. When an existing set price has a problem, change a number in range of 6001 to 65535, and carry

out a setting tool with the machine which NEC ESMPRO Manager of the report is installed in, and change

setting of "Setting" - "Base Setting" - "Receive from Agent (TCP/IP)".

Note

Open ports through your access limit to allow access to localhosts.

[Default]

The port number will be set to default value (31134).

[ok]

Settings are saved and this screen closes.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 116 117

Sin comentarios

Red Hat ENTERPRISE LINUX 4.5.0 - Guía de usuario Pagina 39